Grass Valley K2 Dyno v.1.6 - Manual (Page 69)

15 April 2010 K2 Dyno Controller User Manual 69
About play speed
1. Replay the scene.
2. Press the Fn button.
3. At a scene in which you want to switch camera angles, touch ANGLE to display the
camera angle selection screen, touch a camera name panel, and then touch
SELECT .
Press the A / B / C button or press the D / E / F button after pressing the Shift button.
• The controller will go back to the In point of the scene, and replay the scene with
a different angle.
NOTE: The playback speed remains the same even if you switch the camera during
a slo-mo playback.
NOTE: If the playback is stopped such as moving the T-Bar back to the 0% position
after replaying a scene in step 1, the controller cues up to the In point of the scene
after the operation in step 3.
NOTE: If you perform the steps 2 to 3 again when playing the record train, the
controller will go back to the playback point prior to switching the camera angles
instead of going back to the scene's In point.
About play speed
If you use the K2 Summit/Solo ChannelFlex features and have Super Slo-Mo clips,
you should consider the K2 Dyno controller’s internal play speed as well as the speed
that is displayed when you view the video, and how this interacts with your use of
controls. Play speed behavior is as follows:
Button operation