Grass Valley K2 Dyno v.1.6 - Manual (Page 41)

15 April 2010 K2 Dyno Controller User Manual 41
Shutting down
Shutting down
Shutting down the K2 Dyno Controller
Exit the K2 Dyno Client software to shut down the K2 Dyno Controller.
1. Touch the CONFIG tab to display the CONFIG screen.
2. Press the Shift button, and then touch SHUT DOWN .
3. Select the action of the K2 Dyno Controller.
• Touch SHUTDOWN to power off the K2 Dyno Controller.
• Touch RETURN TO INITIAL SCREEN to return to the startup screen.
4. Select the option whether or not to close the session that is currently being used.