Grass Valley K2 Dyno v.1.6 - Manual (Page 94)

94 K2 Dyno Controller User Manual 15 April 2010
Chapter 5 Marking Function
3. Touch Name .
• If your K2 Dyno Controller is connected to a keyboard, a name can be entered
directly.
4. Select a name.
• You can switch the categories by touching < / > at the top of the touch panel. In
addition, you can move one level up in the directory by touching the category
name panel at the top of the touch panel.
• Category names are displayed in orange and each keyword is displayed in white.
To choose a category, double-touch the category.
• To enter a name that is not listed in the panel, touch KEYBOARD at the bottom
of the panel and enter the desired characters.
• If you turn on Append , the selected keyword can be added to the end of the
entered string separating them with a space. Once you have finished entering a
name, touch
BACK .
5. Touch the "Keyword" panel.
6. Enter a keyword.
• You can switch the categories by touching < / > at the top of the touch panel. In
addition, you can move one level up in the directory by touching the category
name panel at the top of the touch panel.
• Category names are displayed in orange and each keyword is displayed in white.
To choose a category, double-touch the category.
• Up to three keywords can be entered in a row. If you want to enter only one or
two keywords, touch BACK after entering them.