Grass Valley K2 Dyno v.1.6 - Manual (Page 60)

60 K2 Dyno Controller User Manual 15 April 2010
Chapter 3 Tutorial
3. Repeat Steps 1 and 2 to store items as necessary.
4. Touch the first event, and then press the Cue Up button.
Press the PL button one, two, or three times as necessary to cue up the start point,
as follows:
• If you are not on the PLAYLIST screen, pressing the PL button displays the
PLAYLIST screen.
• If you are in the PLAYLIST screen and there is no playback pointer in the
playlist, pressing the PL button moves the playback pointer to the point where
the playlist stopped its playback.
• If you are in the PLAYLIST screen and there is a playback pointer in the playlist,
pressing the PL button cues up to the beginning of the playlist.
5. Press the Play button.
• You can also perform a slo-mo playback with the T-Bar.
• Pressing the Previous/Next button during a playback begins a playback of the
previous/next event.
• Pressing the Previous button after pressing the Fn button cues up to a point just
before the In point of the event in playback and performs a playback passing the
In point. Pressing the forwared
Previous/Next button after pressing the Fn
button cues up to a point just before the Out point of the event in playback and
performs a playback passing the Out point.
Button operation