Grass Valley K2 Dyno v.1.6 - Manual (Page 18)

18 K2 Dyno Controller User Manual 15 April 2010
Chapter 1 Component Names and Functions
Rear
NOTE: Be sure to use the cables, such as power cable and other cables, included in
this product.
No. Name Function
(1) Power button Turns the power to the K2 Dyno Controller on or off.
(2) USB port Connects to a keyboard, mouse, or USB storage device.
(3) Cable hook You can hook cables such as power cables and VGA cables to prevent
them from being disconnected inadvertently.
(4) Power connector For connecting to the power supply.
(5) D-sub 15 pin
connector Connects to a second display. Displays with 1024 x 768 resolution or
more are supported.
For more information about the components in the expansion screen,
see
"Connecting a Second Display" on page 203 .
(6) GigE port Connects the K2 Dyno Controller to the K2 Summit Production Client
via Gigabit Ethernet.
The GigE ports can be used for the transfer and control purposes
separately.
For more information, see
"Assigning the network ports" on page 200 .
(1)
(2)
(4) (5) (6) (3) (3)