Grass Valley K2 Dyno v.1.6 - Manual (Page 68)

68 K2 Dyno Controller User Manual 15 April 2010
Chapter 4 Playback
Switching cameras
This section describes how to switch cameras during a live playback and replay.
NOTE: You can apply effects (Flying M/E), such as dissolves, to the video when
replaying a scene or switching cameras during a playlist or highlight playback. To
enable Flying M/E, press the
Shift button and then press the M/E button. If a
keyboard is connected, you can enable/disable Flying/ME by pressing the [F1] key.
For more information on how to set the Flying M/E setting, see
"Mix effect
settings" on page 171 .
Switching camera angles
1. Begin a live playback.
2. At a scene in which you want to switch camera angles, from the HOME screen
touch ANGLE to display the camera angle selection screen, touch a camera name
panel, and then touch SELECT .
Press the A / B / C button or press the D / E / F button after pressing the Shift button.
• The button for the selected camera lights up in red.
NOTE: The playback speed remains the same even if you switch the camera during
a slo-mo playback.
Replaying the same scene with another angle
You can go back and replay a scene from the scene's In point when you switch
cameras.
Button operation