Grass Valley K2 Dyno v.1.6 - Manual (Page 95)

15 April 2010 K2 Dyno Controller User Manual 95
Entering information with shortcuts
• To enter a keyword that is not listed in the panel, touch KEYBOARD at the
bottom of the panel and enter the desired characters.
7. From "Rating", touch and select the number of the rating.
8. Touch Icon , and then select an icon.
9. Touch BACK to return.
• Touch CLEAR ALL to delete the entered logging information.
• Touch RESTORE to restore the logging information prior to editing.
• Touch DEFAULT to store the current logging information as default. If you store
the default logging information, the stored logging information will be set to a
mark when adding one. You can check and set the default logging information
in "NAME" of the CONFIG screen. For more information, see
"Default logging
settings" on page 183 .
Entering information with shortcuts
You can enter logging information with shortcuts when a keyboard is connected to the
K2 Dyno Controller. You can enter information with the following shortcuts after
selecting the mark for which you want to enter logging information.
NOTE: Use number keys on the main keyboard when entering a number with
shortcuts. You cannot enter a number with a numerical keypad.
• Press the [Ctrl] + [4] keys to enter a name.
• Press the [Ctrl] + [1]/[2]/[3] keys to enter the keyword 1, keyword 2 or keyword 3.
• Press the [Ctrl] + [Space] keys to enter a rating. Press the [Ctrl] + [Space] keys one
time to enter one star, press the keys two times to enter two stars, press the keys
three times to enter three stars, and press the keys four times to delete the entered
stars.