Grass Valley K2 Dyno v.1.6 User Manual
Page 91
15 April 2010
K2 Dyno Controller User Manual
91
Cueing up to the previous or next item using the JOG knob (Browse mode)
NOTE: If you press the
Out
button without pressing the
In
button during a live
playback or while playing the record train, the timecode when the button was
pressed is set as the Out point, which automatically adds the In point with the
default duration. For more information on how to set the default duration, see
.
NOTE: If you want to modify the In and Out points of a created scene, see
NOTE: Pressing the
In
/
Out
button, during a replay of a scene you cued up, updates
the In/Out point with the playback timecode where the button was pressed.
NOTE: While playing a scene, the playback will not be stopped even after passing
the Out point until you perform an operation to change the playback status.
NOTE: In and Out points added on the record train as marks or scenes are not
protected. Therefore, these In and Out points will be deleted when a LoopRec
operation is performed on the record train. Save important scenes in a highlight or
library as clips or turn off the LoopRec setting. For more information on how to set
LoopRec, see
"Changing the channel configuration for standard channels" on
Cueing up to the previous or next item using the JOG knob
(Browse mode)
In the Browse mode, you can use the JOG knob to quickly cue up to the previous or
next item.
1. Select an item.
• Select any item in the MARK, HIGHLIGHT, LIBRARY, PLAYLIST, or
SEARCH screen. For the PLAYLIST screen, select an event.
NOTE: For operations in the expansion screen, the selection is invalid if the
selected item is not shown on the touch panel even if it is displayed in the expansion
screen.
2. Press the
Shift
button, and then press the
Brws
button.
• The controller enters the Browse mode and the
Brws
button lights up in green.
During the Browse mode, the normal operations to rewind/fast forward with the
JOG knob are disabled.
3. Rotate the JOG knob to the right or left.
• The playback pointer moves to the previous or next items consecutively for
cueing up from the one you selected in step 1. If you selected an event in step 1,
the playback pointer moves to the previous or next event for cueing up.
• To exit the Browse mode, press the
Shift
button, and then press the
Brws
button.You can also press the
Live
button to exit the Browse mode and enter the
live playback.