Grass Valley K2 Dyno v.1.6 - Manual (Page 169)

15 April 2010 K2 Dyno Controller User Manual 169
Playback settings 2 (JOG speed, pre/post-roll definitions)
Playback settings 2 (JOG speed, pre/post-roll definitions)
1. Touch < or > in the CONFIG screen, and then touch PLAY2 .
2. Set items.
3. Touch APPLY .
• When you touch APPLY , the settings are reflected.
• When you touch CANCEL , the settings are restored to the settings before
changes were made.
No. Name Function
(1) JOG MAX Speed Sets the maximum speed for JOG knob operations, including the speed
in the Fast JOG mode. Touch the panel to enter a value.
(2) FAST JOG Speed Selects the jog speed for the Fast JOG mode. The jog speed is set to the
speed multiplied by the selected value in reference to the normal JOG speed.
(3) DYNO KNOB Set whether or not to automatically switch modes between the normal
JOG mode and Fast JOG mode. If it is turned on, the normal JOG mode
is automatically switched to the Fast JOG mode when the JOG speed
has changed suddenly during a JOG operation.
(4) Preroll Selects up to three pre-roll patterns. Touch the panel to enter a value.
You must set a value of 10,00 (10 seconds) or shorter.
(5) Postroll Selects up to three post-roll patterns. Touch the panel to enter a value.
You must set a value of 10,00 (10 seconds) or shorter.
(1)
(2)
(4)
(5)
(3)