Grass Valley K2 Dyno v.1.6 - Manual (Page 28)

28 K2 Dyno Controller User Manual 15 April 2010
Chapter 2 Starting Up and Shutting Down
5. Set the use of the channels.
• Assign a channel's use by touching the rectangular panels for each channel from
C1 to C4 as follows:
- Single Rec – Standard record channel.
- Player – Standard play channel.
- None – The channel is not controlled by the K2 Dyno Controller. The K2
Summit/Solo channel can be used for other applications.
• The assigned camera angle is displayed for a channel that is set as a record
channel.
6. Touch the Angle Assign button.