Grass Valley K2 Dyno v.1.6 - Manual (Page 183)

15 April 2010 K2 Dyno Controller User Manual 183
Default logging settings
• When you touch CANCEL , the settings are restored to the settings before
changes were made.
Default logging settings
You can set the default logging information. If you store the default logging
information, the stored logging information will be set to a mark when adding one.
1. Touch < or > in the CONFIG screen, and then touch NAME .
2. Set items.
3. Touch APPLY .
• When you touch APPLY , the settings are reflected.
• When you touch CANCEL , the settings are restored to the settings before
changes were made.
No. Name Function
(1) Logging information Sets the logging information to store as default.
Touching the Name, Keyword, or Icon panel opens the entry screen.
You can either select an item from the panel or touch
KEYBOARD to
enter text directly.
(1)