Grass Valley K2 Dyno v.1.6 - Manual (Page 177)

15 April 2010 K2 Dyno Controller User Manual 177
Setting a destination
• The destination setting screen appears. For information about the indication
meanings and individual panel functions, see the following table.
No. Name Function
(1) DELETE Deletes the selected pass.
(2) SERVER BIN Touch this to select a highlight bin or library bin (V: drive) on a local
or network Summit.
(3) LOCAL
CONTROLLER Touch this to select a folder on the K2 Dyno Controller, a folder on a
USB storage device that is attached to the K2 Dyno Controller, or a
network device folder. Touching this display s the folder(s).
(4) SERVER FILE
SYSTEM Specifies a location including an external device (such as a USB
storage device) connected to the local Summit or a folder on the
network that can be accessed from the local Summit. Touch this to
enter a path from the local Summit. For more information about
specifying the path, see
"Specifying the SERVER FILE SYSTEM" on
page 180 .
(5) Send setting Every touch switches between "ON" and "OFF".
Data is sent to the path(s) that is set to "ON", while no data is sent to
the path(s) that is set to "OFF".
(6) Angle Shows the angle to be sent.
(7) Send Path Shows the configured path.
(8) Scroll Touch this to scroll the destination view up or down.
Keep touching this to scroll the display automatically.
(1) (2) (3) (4)
(5) (7)
(6) (8)