Grass Valley K2 Dyno v.1.6 - Manual (Page 32)

32 K2 Dyno Controller User Manual 15 April 2010
Chapter 2 Starting Up and Shutting Down
1. Start up the K2 Dyno Controller.
For information on how to start up the controller, see "Starting up the K2 Dyno
Controller" on page 24 .
When you start up the K2 Dyno Controller for the first time or when you want to
create a session changing the previous channel configuration, you need to perform
the initial settings at the startup screen. For the default settings, you can set the
settings including the K2 Summit Production Client selection to be used and
channel model setting. Once the initial settings are set, it is not necessary to set
them with
NEW or CONTINUE from the next time.
2. Touch CONFIGURE .
3. Select the Summit you want to use, and then touch NEXT .
• Only the online Summit(s) are displayed. The Summit that was used for the last