Grass Valley K2 Dyno v.1.6 - Manual (Page 173)

15 April 2010 K2 Dyno Controller User Manual 173
Panel settings (the confirmation dialog setting, audio level meter setting)
NOTE: If you made any changes to the "M/E" settings in the CONFIG screen
during a session, it will not be reflected to the M/Es that are already being used in
a playlist. If the settings are different between before and after the changes, the M/
E panel text in the PLAYLIST screen is displayed in yellow. However, if the M/E
setting prior to the change matches another M/E, its M/E number is displayed.
3. Touch APPLY .
• When you touch APPLY , the settings are reflected.
• When you touch CANCEL , the settings are restored to the settings before
changes were made.
Panel settings (the confirmation dialog setting, audio level meter
setting)
1. Touch < or > in the CONFIG screen, and then touch PANEL .
2. Set items.
No. Name Function
(1) Delete Confirm
Dialog Sets whether or not to display the confirmation dialog when an item is
deleted.
(2) Count Down Display Turn on Round Up Frame to display the timecode indication in
"Count Down" on the HOME screen and in "Rem" on the PLAYLIST
screen rounding up the frames.
(1)
(2)
(3)
(4)