Grass Valley K2 Dyno v.1.6 - Manual (Page 122)

122 K2 Dyno Controller User Manual 15 April 2010
Chapter 7 Editing a Playlist
1. Touch and select the event you want to trim in the PLAYLIST screen.
In the PLAYLIST screen, press the Previous/Next button to select the event you
want to trim.
2. Press the Shift button, and then press the Trim button.
• The controller cues up to the In point location on the record train side of the
selected event.
• The controller enters the trim mode. In the trim mode, the In , Out , and Trim
buttons light up in yellow.
• The trim mode screen appears. For more information about the indication
meanings and individual panel functions, see the following table. To perform
functions (indicated by the shaded area in the table) that are displayed at the top
of the menu panels shown at the bottom of the screen, press the
Shift button, and
then touch the desired menu panel. For more information on how to use the Shift
button, see "About Shift button operations" on page 21 .
No. Name Function
(1) Play Shows the timecode of the playback pointer.
(2) Path Shows information about the target to be trimmed.
(3) Src Shows the timecode on the record train. If the playback pointer is on
the record train, the "Src" text is displayed in blue. If you press the
Cue Up button, the playback pointer is moved to the playlist and the
playlist becomes the target for trimming.
Button operation
(5)
(12) (15)
(2)
(11)
(13) (14)
(6)
(7)
(8)
(9)
(1)
(10)
(3) (4)