Grass Valley K2 Dyno v.1.6 - Manual (Page 31)

15 April 2010 K2 Dyno Controller User Manual 31
Changing the channel configuration for ChannelFlex Suite features
Changing the channel configuration for ChannelFlex Suite
features
Use this procedure if controlling Multi-Cam, 3D/Video+Key, or Super Slo-Mo
channels on the K2 Summit Production Client or K2 Solo Media Server. These
features are a part of the ChannelFlex Suite on the K2 system.
If controlling standard channels with the K2 Dyno Replay Controller, use the
procedure
"Changing the channel configuration for standard channels" on page 25 .
1. Verify that the K2 Summit Production Client or K2 Solo Media Server support
ChannelFlex Suite features. Requirements are as follows:
• K2 system software version 7.2 or higher
• AppCenter Elite license installed on the K2 system
• For Super Slo-Mo, HD license installed on the K2 system
2. Configure the K2 Summit Production Client or K2 Solo Media Server for the
ChannelFlex Suite channel type that you intend to control with your K2 Dyno
Replay Controller. From AppCenter, open Configuration Manager and assign the
channel type. The following example illustrates Multi-Cam Recorder.
Select one of the following:
• 3D/Video+Key Player
• 3D/Video+Key Recoder
• Multi-Cam Recorder
• Super Slo-Mo x2 Recorder
• Super Slo-Mo x3 Recorder
Refer to the K2 AppCenter User Manual for complete procedures.