Grass Valley K2 Dyno v.1.6 - Manual (Page 121)

15 April 2010 K2 Dyno Controller User Manual 121
Deleting events from a playlist
Deleting events from a playlist
1. Touch and select the event you want to delete in the PLAYLIST screen.
In the PLAYLIST screen, press the Previous/Next button to select the event you
want to delete.
• Multiple events can be additionally selected while holding down the Fn button.
You can also press the Shift button, and then select a range of events while
holding down the Fn button.
2. Press the Shift button, and then touch DELETE .
3. Touch YES .
Match frame operations from playlists to the record train
When the playback pointer is on a playlist, you can make the playback pointer jump
to the same timecode position on the record train for the current angle. It is useful such
as when you want to check the video before or after the selected event.
1. Touch an event in the PLAYLIST screen, and then press the Cue Up button.
• When the PLAYLIST screen is displayed, you can press the Previous/Next
button to select and cue up at the same time.
• The controller cues up to the In point of the selected event.
2. Press the Shift button, and then press the Match button.
• The playback pointer is moved to the same timecode position on the record train
for the current angle.
NOTE: If you press the Cue Up button after step 2, the playback pointer moves back
to the In point location of the selected event.
NOTE: Match frame operations are available while in the trim mode, as well. For
trimming operations with the playback pointer on a playlist, you can switch to
trimming on the record train side by pressing the
Match button after pressing the
Shift button. You can also move the playback pointer back to the playlist by pressing
the Cue Up button while trimming on the record train side.
Trimming in a playlist
You can use the following methods for trimming in a playlist; to trim an event moving
the playback pointer to the playlist side, or to trim In/Out points of an event moving
the playback pointer to the record train side. This section describes a case for
trimming In/Out points of an event on the record train side.
NOTE: After an item is stored in a playlist, trimming the event item will not be
reflected to the original item.
Button operation