Grass Valley K2 Dyno v.1.6 - Manual (Page 21)

15 April 2010 K2 Dyno Controller User Manual 21
About Shift button operations
About Shift button operations
When a keyboard or display is connected to the K2 Dyno Controller, you can use the
[Shift] key on the keyboard or the
Shift button in the expansion screen instead of pressing
the Shift button on the controller; however, the operations are different for each case.
• For operations with the Shift button on the controller:
If you press the Shift button once, it illuminates in yellow and the top functions of
the controller buttons and panel menu are enabled for only one time. After that, if
you press any button or menu panel you want to perform, the
Shift button turns off.
• For operations with the [Shift] key on the keyboard:
Press the button or menu panel you want to perform while holding down the [Shift]
key.While holding down the [Shift] key, the top functions of the controller buttons
and panel menu are enabled.
• For operations with the Shift button in the expansion screen:
If you press the Shift button, the button turns light blue. After that, press the button
or menu panel you want to perform. In the expansion screen, if the Shift button is
pressed once, the top functions of the controller buttons and panel menu are
enabled until the
Shift button is pressed again.
(13) M/E Switches to the Flying M/E mode. Effects are added when switching
angles or changing cue up points during a replay of an item.
PL Displays the PLAYLIST screen. Press this in the PLAYLIST screen to
perform the following: if a playback pointer is in the playlist, the
controller cues up to the beginning of the playlist, and if playback
pointer is not in the playlist, the playback pointer moves to the point
where the previous playlist stopped its playback.
(14) Send Copies the selected item to the destination that you set in
"NETWORK" on the CONFIG screen. For more information, see
"Transferring items (SEND function)" on page 113 .
Goto Cues up to an item by entering a number.
(15) Top Press this during an item (Mark, Scene, Highlight, Event, and Library)
playback to cue up to the beginning (or the In point, depending on the
item) of the item retaining the ongoing playback.
In Adds the In point of a mark/scene, or changes the In point when
trimming a highlight/event.
(16) Btm Press this during an item (Mark, Scene, Highlight, Event, and Library)
playback to cue up to the end of the item retaining the ongoing playback.
Out Adds the Out point of a mark/scene, or changes the Out point when
trimming a highlight/event.
(17) Trim Switches to the trim mode.
Take During a playlist playback, press this button to begin the playback of
the next event. In a value entry screen, press this to confirm your entry
and return to the previous screen.
While in the trim mode, it exits the trim mode.
If you press this during the on-air preview mode, the item that is put into
standby or being played in the preview channel will be loaded and played
in the program channel. For more information about the on-air preview
mode, see
"On-air preview mode and multi-channel mode" on page 73 .
No. Name Function