Grass Valley K2 Dyno v.1.6 - Manual (Page 212)

212 K2 Dyno Controller User Manual 15 April 2010
Chapter 11 Connecting a Second Display
Jog
(3) Fn Turns to the function mode. If you press the Fn button and then press
a corresponding button, the button action that is performed may be
different from the normal one. For more information, see the operation
instructions in each chapter.
(4) Shift Enables the functions that are disabled in the panel menu. For more
information on how to use the
Shift button, see "About Shift button
operations" on page 21 .
No. Name Function
(1) T-Bar Performs the same operations on the screen as using the T-Bar.
(2) Fast Switches to the Fast JOG mode.This is toggle switch, so it turns off if
you press this button when it is in Fast mode. The speed for the fast
forward and rewind operations using the JOG knob becomes
faster.The
Previous/Next buttons light up in green while in the Fast
JOG mode. You can also set the controller so that the normal JOG
mode and Fast JOG mode are switched automatically. For more
information, see
"Playback settings 2 (JOG speed, pre/post-roll
definitions)" on page 169 .
(3) Shtl Switches to the shuttle mode. The maximum speed for the shuttle mode
is 3200%. In the shuttle mode, you can also use the mouse wheel for
operations.
(4) JOG Performs the same operations on the screen as using the JOG knob.
(5) PRESET SPEED Displays the value for "PRESET SPEED" in the play option settings.
No. Name Function
(1)
(4)
(2)
(3)
(5)