Grass Valley K2 Dyno v.1.6 - Manual (Page 128)

128 K2 Dyno Controller User Manual 15 April 2010
Chapter 7 Editing a Playlist
• When you return to the PLAYLIST screen, the M/E panel of the selected event
shows the mark and the M/E panel of the expanded event shows the up/
down arrow mark.
NOTE: The audio data to be expanded is obtained from the record train. When
unprotected audio data is deleted by a LoopRec operation, you cannot use the audio
split.
Playing events in a playlist
Playing a playlist
1. Display the PLAYLIST screen, select the first event in the playlist, and then press
the Cue Up button.
Press the PL button as many times as necessary (up to three times).
• For a button operation, pressing the PL button in other screens displays the
PLAYLIST screen. Press it in the PLAYLIST screen to perform the following:
if there is a playback pointer in the playlist, the controller cues up to the
beginning of the playlist, and if there is no playback pointer in the playlist, the
playback pointer is moved to the point where the playlist stopped its playback
for the last time.
Button operation