Grass Valley K2 Dyno v.1.6 - Manual (Page 171)

15 April 2010 K2 Dyno Controller User Manual 171
Playback settings 4 (operation channel lock)
Playback settings 4 (operation channel lock)
1. Touch < or > in the CONFIG screen, and then touch PLAY4 .
2. Set the item.
Mix effect settings
You can set the settings for the Flying M/E and six M/E about the transition type,
whether or not to enable the audio cross fade, and the transition duration.
1. Touch < or > in the CONFIG screen, and then touch M/E .
No. Name Function
(1) Lock Channel The channel selected here is set so that it cannot be selected from this
K2 Dyno Controller. For example, if the C3 and C4 channels are
available in the multi-channel mode and you want the first K2 Dyno
Controller to use the C3 channel while you want the second K2 Dyno
Controller to use the C4 channel, you can set your controller so that the
C4 channel cannot be selected from the first K2 Dyno Controller.
Because the channel that another user is operating cannot be selected,
you can prevent the channel from being operated by mistake.
(1)