Grass Valley K2 Dyno v.1.6 - Manual (Page 35)

15 April 2010 K2 Dyno Controller User Manual 35
Changing the channel configuration for ChannelFlex Suite features
The Angel Assign screen opens. Assign camera angles as follows:
• If you assigned channels as Single Rec (3D/Video+Key Recorder) channels or as
Super Slo-Mo channels, set one camera angle for each of those channels.
• If you assigned channels as Multi-Rec (Multi-Cam) channels, set two camera
angles for each of those channels.
7. When camera angles are set, touch NEXT.
NOTE: There are several important restrictions on the channel that is set as
Recorder depending on the codec in use. Be sure to check the release notes of the
K2 Summit Production Client and K2 Dyno Controller before using the product.