Controller button – Grass Valley K2 Dyno v.1.6 User Manual
Page 209
15 April 2010
K2 Dyno Controller User Manual
209
Controller button
Controller button
(2)
Gang
Sets the option in the multi-channel mode.
If you turn the Gang mode on, operations with the T-Bar or JOG knob
are synchronized in the multiple channels selected from the channel
selection panel. For example, if you turn Gang on and select channel C
and D, and press the T-Bar up to the 50% position, the video for both
the C and D channels is played at the 50% speed.
For more information about the multi-channel mode and the Gang
mode, see
"Synchronizing playback status for multi-channel (Gang)
(3)
Prv Ctl
Sets the option in the on-air preview mode.
If you turn this on, the channel you set as the preview channel is set as
the operation target. The preview channel is set using
"RECORDTRAIN" on the CONFIG screen. For more information
about the playback operation in the on-air preview mode, see
"Playback operations in the on-air preview mode" on page 73
.
(4)
Channel selection
If
Prv Ctl
is turned on, the channel of the preview channel is selected.
If
Gang
is turned on, select the multiple channels whose operations
are to be synchronized.
(5)
O/A Lock
Turns on or off the on-air lock.
While it is turned on, operations to change the playback status, such as
cueing up, playback operations, T-Bar or JOG knob operations, and
camera angle changes, are disabled.
(6)
Flying M/E
Turn this on to apply M/E when switching angles or changing cue up
points. During a live playback, M/E is not applied even if this setting
is turned on. For information on how to set the Flying M/E, see
.
If a keyboard is connected, you can enable/disable Flying/ME by
pressing the [F1] key.
(7)
Step
Turn this on to stop the playback every time after storing a single event
during a playlist playback.
(8)
Auto Cue
Turn this on to cue up an item when it is selected.
(9)
Auto Play
Turn this on to cue up and play an item when it is selected.
(10)
OnAir Pvw
Multi Chnnel
Switches between the on-air preview and multi-channel modes.
No.
Name
Function
(1)
Live
Starts recording at first time and plays the recording data with
minimum time difference. (nearly E/E)
(2)
Add Mark
Adds a mark on the record train.
No.
Name
Function
(2)
(1)
(4)
(3)
(6)
(5)
(8)
(7)
(10)
(9)
(12)
(11)
(14)
(13)
(16)
(15)
(18)
(17)
(20)
(19)
(22)
(21)