Grass Valley K2 Dyno v.1.6 - Manual (Page 86)

86 K2 Dyno Controller User Manual 15 April 2010
Chapter 5 Marking Function
Components in the MARK screen
The MARK screen is a screen for listing the information of the In and Out points that
were marked on the record train.
1. Touch the MARK tab.
• The MARK screen appears. For more information about the indication
meanings and individual panel functions, see the following table. To perform
functions (indicated by the shaded area in the table) that are displayed at the top
of the menu panels shown at the bottom of the screen, press the
Shift button, and
then touch the desired menu panel. For more information on how to use the Shift
button, see "About Shift button operations" on page 21 .
No. Name Function
(1) TimeCode Shows the timecodes of the In point and/or the Out point.
(2) Log Shows "M" for only the In point is added, and "S" for both the In point
and the Out point are added.
(3) Info Shows the number and name of the item. By default, the number and
name of an item (M or S indicating the item type + number) are same.
If the item has logging information entered, it also displays the logging
information.
(4)
(1)
(5)
(6) (7) (9)
(2) (3)
(10) (8)