Grass Valley K2 Dyno v.1.6 - Manual (Page 184)

184 K2 Dyno Controller User Manual 15 April 2010
Chapter 10 Settings
Exporting a log
You can output an operation log. Use this to clarify the cause of a trouble.
1. Touch < or > in the CONFIG screen, and then touch LOG .
2. Set items.
3. Touch Exec .
• To cancel the output, touch Cancel .
No. Name Function
(1) Verbose Level Sets the log output level. A more detailed log is output as you increase
the value.
(2) Output Folder Touch the panel to specify the folder to which a log is output.
(3) Gathering From Sets the source(s) from which a log is collected. If you select Local
Only , a log for operations, only on the K2 Dyno Controller that you
are currently working on, is output. If you select Session , a log for
operations on all the controllers is output even when multiple K2 Dyno
Controllers are connected. If you select
Network , a log for operations
on all the controllers on the entire network is output.
(1)
(2)
(3)