Editing the audio, Expanding, Expanding audio to the previous and next – Grass Valley K2 Dyno v.1.6 User Manual
Page 126: Expanding audio to the previous and next events, Expanding audio
126
K2 Dyno Controller User Manual
15 April 2010
Chapter 7 Editing a Playlist
2. Touch the M/E panel between the events to which you want to apply effects.
• Every touch changes the M/E pattern.
• You can also set the M/E pattern by selecting the event, pressing the
Shift
button, and then touching the
M/E
.
NOTE: If you cannot select the M/E pattern you want to set, check the setting in
"M/E" on the CONFIG screen. For more information, see
NOTE: You can also set M/E to a whole playlist at a time. To do so, touch the
playlist property panel to select the M/E pattern.
NOTE: Note that if you store an M/E-applied playlist in a library, a cut change is
applied between events in stead of losing M/Es.
Editing the audio
Expanding audio to the previous and next events (audio split)
You can expand the audio of a selected event to the previous and next events, while
setting the selected one as the center.
1. Touch and select the event of which audio track is to be expanded in the
PLAYLIST screen.
In the PLAYLIST screen, press the
Previous/Next
button to select the event of
which audio track is to be expanded.
Button operation