Grass Valley K2 Dyno v.1.6 - Manual (Page 25)

15 April 2010 K2 Dyno Controller User Manual 25
Changing the channel configuration for standard channels
2. Touch NEW .
• A new session for the same channel configuration as you set for the last time is
created.
• The session that was used for the last time can be deleted by touching DELETE
after pressing the Shift button. For more information on how to delete sessions,
see "Deleting a session" on page 39 .
• Check if the versions of App Center and K2 Dyno Client software are
compatible.
- If the K2 Dyno Controller cannot be started up, their major or minor versions are
not compatible.
- If a warning message asking you to choose whether or not to start up the K2 Dyno
Controller is displayed, their patch versions are not compatible.
Changing the channel configuration for standard channels
Use this procedure if controlling standard K2 system channels with the K2 Dyno
Replay Controller.
If controlling Multi-Cam, 3D/Video+Key, or Super Slo-Mo channels on the K2
Summit Production Client or K2 Solo Media Server, use the procedure
"Changing the
channel configuration for ChannelFlex Suite features" on page 31 .
When you start up the K2 Dyno Controller for the first time or when you want to
create a session changing the previous channel configuration, you need to perform the
initial settings at the startup screen. For the default settings, you can set the settings
including the K2 Summit Production Client selection to be used and channel model
setting. Once the initial settings are set, it is not necessary to set them with
NEW or
CONTINUE from the next time.
1. Start up the K2 Dyno Controller.
• For information on how to start up the controller, see "Starting up the K2 Dyno
Controller" on page 24 .