Grass Valley K2 Dyno v.1.6 - Manual (Page 96)

96 K2 Dyno Controller User Manual 15 April 2010
Chapter 5 Marking Function
Trimming
You can modify the In/Out point of a scene.
NOTE: A marked item with only an In point cannot be trimmed.
1. Display the MARK screen, and then touch and select the scene you want to trim.
Press the Previous/Next button to select the scene for which you want to trim.
• When the HOME screen is displayed, pressing the Previous/Next button
displays the MARK screen.
2. Touch the In/Out/Dur panel.
Press the Shift button, and then press the Trim button.
• The controller enters the trim mode. In the trim mode, the In , Out , and Trim
buttons light up in yellow.
• For the button operation, the controller cues up to the In point location of the
selected scene.
Button operation
Button operation