Grass Valley K2 Dyno v.1.6 - Manual (Page 166)

166 K2 Dyno Controller User Manual 15 April 2010
Chapter 10 Settings
Clip settings
You can set settings for clips.
1. Touch < or > in the CONFIG screen, and then touch CLIP .
2. Set items.
No. Name Function
(1) Default Dur Touch the timecode to change the default duration for clips by entering
a value. This setting will be reflected as the duration in cases where you
store a mark with only the In point to a highlight/playlist, or you press
the
Out button without pressing In button to create a scene during a
live playback or while playing the record train.
(2) GuardBand Touch the timecode to change the guard band length for clips by
entering a value.
The guard band is a function to protect recording data for a scene that is
stored in a highlight, library, or playlist from being overwritten by a
LoopRec operation. Make settings on the File Export screen to transfer
items including their guard band parts with the SEND function. See
"Setting the file export" on page 175 . However, guard bands of clips
with no source in guard band parts, such as a highlight stored from a
library, will not be included.
(3) Playlist Start Time Set the timecode of the In point when you create a new playlist. The In
point that is set will not be reflected to the existing playlists.
(1)
(2)
(5)
(7) (8) (6)
(3)
(4)