Setting the file export – Grass Valley K2 Dyno v.1.6 User Manual
Page 175
15 April 2010
K2 Dyno Controller User Manual
175
Setting the file export
3. Touch
APPLY
.
• When you touch
APPLY
, the settings are reflected.
• When you touch
CANCEL
, the settings are restored to the settings before
changes were made.
Setting the file export
1. Touch
<
or
>
in the CONFIG screen, and then touch
FILE EXPORT
.
2. Set the item.
(3)
Clip type
Set the clip type as follows:
• x1: Normal clip
• x2: Super Slo-Mo x2 clip
• x3: Super Slo-Mo x3 clip
When you select a clip type, the remaining settings apply to that clip
type.
(4)
Set current position
Select this button to detect the current position of the physical T-Bar
and set it as your desired position.
(5)
Configure position
Enter your desired T-Bar position as a numeric value.
Set Top and Bottom on the calibration screen, as instructed in
(6)
Speed
Set the playing speed corresponding to the T-Bar position.
No.
Name
Function
(1)
(2)
(3)
(4)