H3C Technologies H3C SecPath F1000-E - Manual (Page 95)

29
[DeviceA-nqa-admin-test-dhcp] history-record enable
[DeviceA-nqa-admin-test-dhcp] quit
# Enable DHCP test.
[DeviceA] nqa schedule admin test start-time now lifetime forever
# Disable DHCP test after the test begins for a period of time.
[DeviceA] undo nqa schedule admin test
# Display results of the last DHCP test.
[DeviceA] display nqa result admin test
NQA entry (admin admin, tag test) test results:
Send operation times: 1 Receive response times: 1
Min/Max/Average round trip time: 512/512/512
Square-Sum of round trip time: 262144
Last succeeded probe time: 2007-11-22 09:54:03.8
Extended results:
Packet loss in test: 0%
Failures due to timeout: 0
Failures due to disconnect: 0
Failures due to no connection: 0
Failures due to sequence error: 0
Failures due to internal error: 0
Failures due to other errors: 0
Packet(s) arrived late: 0
# Display the history of DHCP tests.
[DeviceA] display nqa history admin test
NQA entry (admin admin, tag test) history record(s):
Index Response Status Time
1 512 Succeeded 2007-11-22 09:54:03.8
DNS Test Configuration Example
Network requirements
As shown in Figure 5 , use the DNS function to test whether Device A can resolve the domain name
host.com into an IP address through the DNS server and test the time required for resolution.
Figure 5 Network diagram for DNS tests
IP network
NQA client
Device A
10.1.1.1/16 10.2.2.2/16
DNS server
Configuration procedure
# Create a DNS test group and configure related test parameters.
system-view
[DeviceA] nqa entry admin test
[DeviceA-nqa-admin-test] type dns