H3C Technologies H3C SecPath F1000-E User Manual

Page 302

[DeviceA-GigabitEthernet1/2] vrrp vrid 1 priority 110

[DeviceA-GigabitEthernet1/2] vrrp vrid 1 track 1 reduced 20

[DeviceA-GigabitEthernet1/2] return

Step4

Configure VRRP on Device B

# Create VRRP group 1, and configure the virtual IP address of the group as 192.168.0.10.

system-view

[DeviceB] interface gigabitethernet 1/2

[DeviceB-GigabitEthernet1/2] vrrp vrid 1 virtual-ip 192.168.0.10

[DeviceB-GigabitEthernet1/2] return

Step5

Verify the configuration

# Display the detailed information of the VRRP group on Device A.

display vrrp verbose

IPv4 Standby Information:

Run Mode : Standard

Run Method : Virtual MAC

Total number of virtual routers : 1

Interface GigabitEthernet1/2

VRID : 1 Adver Timer : 1

Admin Status : Up State : Master

Config Pri : 110 Running Pri : 110

Preempt Mode : Yes Delay Time : 0

Auth Type : None

Virtual IP : 192.168.0.10

Virtual MAC : 0000-5e00-0101

Master IP : 192.168.0.101

VRRP Track Information:

Track Object : 1 State : Positive Pri Reduced : 20

# Display the information of track entry 1 on Device A.

display track 1

Track ID: 1

Status: Positive

Notification delay: Positive 0, Negative 0 (in seconds)

Reference object:

BFD session:

Packet type: Echo

Interface : GigabitEthernet1/1

Remote IP : 1.1.1.2

Local IP : 1.1.1.1

# Display the detailed information of the VRRP group on Device B.