H3C Technologies H3C SecPath F1000-E - Manual (Page 184)

9
NOTE:
•
Before restoring a configuration file, ensure that the server is reachable, the server is enabled with TFTP
service, and the client has read and write permission.
• After execution of the command, use the display startup command (in user view) to verify that the
filename of the configuration file to be used at the next system startup is the same with that specified by
the
filename argument.
Displaying and Maintaining Device Configuration
To do… Use the command… Remarks
Display the information about
configuration rollback display archive
configuration
Available in any view
Display the current running
configuration file saved on the
storage medium of the device
display saved-configuration
[ by-linenum ]
Available in any view
Display the configuration files used
at this and the next system startup display startup
Available in any view
Display the validated configuration
in current view
display this [ by-linenum ] Available in any view
Display the current configuration
display
current-configuration
[ [ configuration
[ configuration ] | controller |
interface [ interface-type ]
[ interface-number ] ]
[ by-linenum ] [ | { begin |
include | exclude } text ] ]
Available in any view
NOTE:
For more information about the display this and display current-configuration commands, see Basic
System Configuration Commands in the System Volume.