H3C Technologies H3C SecPath F1000-E - Manual (Page 231)

8
content
This field provides the content of the system information.
Configuring Information Center
Information Center Configuration Task List
Complete the following tasks to configure information center:
Task Remarks
Outputting System Information to the Console Optional
Outputting System Information to a Monitor Terminal Optional
Outputting System Information to a Log Host Optional
Outputting System Information to the Trap Buffer Optional
Outputting System Information to the Log Buffer Optional
Outputting System Information to the SNMP Module Optional
Outputting System Information to the Web Interface Optional
Saving System Information to a Log File Optional
Saving Security Logs into the Security Log File Optional
Configuring Synchronous Information Output Optional
Disabling a Port from Generating Link Up/Down Logging Information Optional
Outputting System Information to the Console
Outputting system information to the console
To do… Use the command… Remarks
Enter system view system-view —
Enable information center info-center enable
Optional
Enabled by default
Name the channel with a specified
channel number
info-center channel
channel-number name
channel-name
Optional
Refer to
Table 2 for default channel
names.
Configure the channel through
which system information can be
output to the console
info-center console channel
{ channel-number |
channel-name }
Optional
By default, system information is
output to the console through
channel 0 (known as console).