H3C Technologies H3C SecPath F1000-E - Manual (Page 27)

26
Run Method : Virtual MAC
Total number of virtual routers : 1
Interface GigabitEthernet0/1
VRID : 1 Adver Timer : 1
Admin Status : Up State : Master
Config Pri : 110 Running Pri : 110
Preempt Mode : Yes Delay Time : 5
Auth Type : None
Virtual IP : 202.38.160.111
Virtual MAC : 0000-5e00-0101
Master IP : 202.38.160.1
# Display detailed information of VRRP group 1 on Device B.
[DeviceB-GigabitEthernet0/1] display vrrp verbose
IPv4 Standby Information:
Run Mode : Standard
Run Method : Virtual MAC
Total number of virtual routers : 1
Interface GigabitEthernet0/1
VRID : 1 Adver Timer : 1
Admin Status : Up State : Backup
Config Pri : 100 Running Pri : 100
Preempt Mode : Yes Delay Time : 5
Auth Type : None
Virtual IP : 202.38.160.111
Master IP : 202.38.160.1
The above information indicates that in VRRP group 1 Device A is the master, Device B is the backup and
packets sent from Host A to Host B are forwarded by Device A.
If Device A fails, you can still ping Host B successfully on Host A. To view the detailed information of the
VRRP group on Device B, use the display vrrp verbose command.
# If Device A fails, the detailed information of VRRP group 1 on Device B is displayed.
[DeviceB-GigabitEthernet0/1] display vrrp verbose
IPv4 Standby Information:
Run Mode : Standard
Run Method : Virtual MAC
Total number of virtual routers : 1
Interface GigabitEthernet0/1
VRID : 1 Adver Timer : 1
Admin Status : Up State : Master
Config Pri : 100 Running Pri : 100
Preempt Mode : Yes Delay Time : 5
Auth Type : None
Virtual IP : 202.38.160.111
Virtual MAC : 0000-5e00-0101
Master IP : 202.38.160.2
The above information indicates that if Device A fails, Device B becomes the master, and packets sent
from host A to host B are forwarded by Device B.