H3C Technologies H3C SecPath F1000-E - Manual (Page 264)

12
Defining Shortcut Keys for Starting Terminal
Sessions/Aborting Tasks
Follow these steps to define shortcut keys for starting terminal sessions/aborting tasks:
To do… Use the command… Remarks
Enter system view system-view ––
Enter user interface view
user-interface { first-num1
[ last-num1 ] | { aux | console |
vty } first-num2 [ last-num2 ] }
––
Define a shortcut key for starting a
terminal session
activation-key character
Optional
Pressing Enter starts the terminal
session by default.
Define a shortcut key for aborting
a task escape-key { default |
character }
Optional
The default shortcut key
combination for aborting a task is
Ctrl+C.
NOTE:
The activation-key command is not supported on the VTY user interface.
Sending Messages to the Specified User Interfaces
Follow these steps to send messages to the specified user interfaces:
To do… Use the command… Remarks
Send messages to the specified
user interfaces
send { all | num1 | { aux |
console | vty } num2 } Required
Available in user view.
Releasing the Connection Established on the User
Interfaces
Multiple users can log in to the system to simultaneously configure the device. In some circumstances,
when the administrator wants to make configurations without interruption from the users that have
logged in through other user interfaces, the administrator can execute the following commands to
release the connection established on the specified user interfaces.
Follow the step below to release the connection established on the user interfaces:
To do… Use the command… Remarks
Release the connection established
on the specified user interfaces free user-interface { num1 |
{ aux | console | vty } num2 } Required
Available in user view.