H3C Technologies H3C SecPath F1000-E - Manual (Page 237)

14
To do… Use the command… Remarks
Configure the output rules of the
system information
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug { level
severity | state state } * | log
{ level severity | state state } * |
trap { level severity | state
state } * ] *
Optional
Refer to
Default Output Rules of
System .
Configure the format of the time
stamp
info-center timestamp
{ debugging | log | trap }
{ boot | date | none }
Optional
The time stamp format for log, trap
and debugging information is
date by default.
Outputting System Information to the Web Interface
This feature allows you to control whether to output system information to the Web interface and which
system information can be output to the Web interface. The Web interface provides abundant search
and sorting functions; therefore, if you configure to output the system information to the Web interface,
you can view system information by clicking corresponding tabs after logging in to the device through the
Web interface.
Follow these steps to set to output system information to the Web interface:
To do… Use the command… Remarks
Enter system view system-view —
Enable information center info-center enable
Optional
Enabled by default.
Name the channel with a specified
channel number
info-center channel
channel-number name
channel-name
Optional
Refer to
Table 2 for default channel
names.
Configure the channel through
which system information can be
output to the Web interface
info-center syslog channel
{ channel-number |
channel-name }
Optional
By default, system information is
output to the Web interface
through channel 6.
Configure the output rules of the
system information
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug { level
severity | state state }* | log
{ level severity | state state }* |
trap { level severity | state
state }* ]*
Optional
Refer to
Default Output Rules of
System .
Configure the format of the time
stamp
info-center timestamp
{ debugging | log | trap }
{ boot | date | none }
Optional
The time stamp format for log, trap
and debugging information is
date by default.