H3C Technologies H3C SecPath F1000-E - Manual (Page 144)

5
To do… Use the command… Remarks
Enter system view system-view —
Create an event entry in the event
table
rmon event entry-number [ description
string ] { log | log-trap log-trapcommunity |
none | trap trap-community } [ owner text ]
Required
Create an entry in the alarm table
rmon alarm entry-number alarm-variable
sampling-interval { absolute | delta }
rising-threshold threshold-value1
event-entry1 falling-threshold
threshold-value2 event-entry2 [ owner text ]
Create an entry in the private alarm
table
rmon prialarm entry-number
prialarm-formula prialarm-des sampling-interval
{ absolute | changeratio | delta }
rising-threshold threshold-value1
event-entry1 falling-threshold
threshold-value2 event-entry2 entrytype
{ forever | cycle cycle-period } [ owner text ]
Required
Use at least one
command.
NOTE:
•
A new entry cannot be created if its parameters are identical with the corresponding parameters of an
existing entry. If the created entry is a history entry, it will be compared with the existing history entries
only on the same interface. See Table 1 for the parameters to be compared for different entries.
• The system limits the total number of each type of entries (See Table 1 for the detailed numbers). When
the total number of an entry reaches the maximum number of entries that can be created, the creation
fails.
Table 1 Restrictions on the configuration of RMON
Entry Parameters to be compared
Maximum number of
entries that can be
created
Event
Event description (description string), event type (log,
trap, logtrap or none) and community name
(trap-community or log-trapcommunity)
60
Alarm
Alarm variable (alarm-variable), sampling interval
(sampling-interval), sampling type (absolute or delta),
rising threshold (threshold-value1) and falling threshold
(threshold-value2)
60
Prialarm
Alarm variable formula (alarm-variable), sampling interval
(sampling-interval), sampling type (absolute,
changeratio or delta), rising threshold (threshold-value1)
and falling threshold (threshold-value2)
50