H3C Technologies H3C SecPath F1000-E - Manual (Page 88)

22
To do… Use the command… Remarks
Enter test type view of the test
group
type { dhcp | dlsw | dns | ftp | http |
icmp-echo | snmp | tcp | udp-echo |
udp-jitter | voice }
—
Configure to send traps to the
network management server under
specified conditions reaction trap { probe-failure
consecutive-probe-failures | test-complete |
test-failure cumulate-probe-failures }
Configure a reaction entry for
monitoring the probe duration of a
test (not supported in UDP jitter and
voice tests)
reaction item-number checked-element
probe-duration threshold-type
{ accumulate accumulate-occurrences |
average | consecutive
consecutive-occurrences } threshold-value
upper-threshold lower-threshold [ action-type
{ none | trap-only } ]
Configure a reaction entry for
monitoring the probe failure times
(not supported in UDP jitter and
voice tests)
reaction item-number checked-element
probe-fail threshold-type { accumulate
accumulate-occurrences | consecutive
consecutive-occurrences } [ action-type
{ none | trap-only } ]
Configure a reaction entry for
monitoring packet round-trip time
(only supported in UDP jitter and
voice tests)
reaction item-number checked-element rtt
threshold-type { accumulate
accumulate-occurrences | average }
threshold-value upper-threshold
lower-threshold [ action-type { none |
trap-only } ]
Configure a reaction entry for
monitoring the packet loss in each
test (only supported in UDP jitter
and voice tests)
reaction item-number checked-element
packet-loss threshold-type accumulate
accumulate-occurrences [ action-type { none
| trap-only } ]
Configure a reaction entry for
monitoring one-way delay jitter
(only supported in UDP jitter and
voice tests)
reaction item-number checked-element
{ jitter-ds | jitter-sd } threshold-type
{ accumulate accumulate-occurrences |
average } threshold-value upper-threshold
lower-threshold [ action-type { none |
trap-only } ]
Configure a reaction entry for
monitoring the one-way delay
(only supported in UDP jitter and
voice tests)
reaction item-number checked-element
{ owd-ds | owd-sd } threshold-value
upper-threshold lower-threshold
Configure a reaction entry for
monitoring the ICPIF value (only
supported in voice tests)
reaction item-number checked-element
icpif threshold-value upper-threshold
lower-threshold [ action-type { none |
trap-only } ]
Configure a reaction entry for
monitoring the MOS value (only
supported in voice tests)
reaction item-number checked-element
mos threshold-value upper-threshold
lower-threshold [ action-type { none |
trap-only } ]
Required
Configure to send
traps accordingly.
No traps are sent to
the network
management server
by default.