H3C Technologies H3C SecPath F1000-E - Manual (Page 277)

2
Configuration task Remarks
Associating the HTTPS Service with an SSL Server
Policy
Required
Enabling the HTTPS Service Required
Associating the HTTPS Service with a Certificate
Attribute Access Control Policy
Optional
Configuring the Port Number of the HTTPS Service Optional
Associating the HTTPS Service with an ACL Optional
Associating the HTTPS Service with an SSL Server
Policy
Before enabling the HTTPS service, associate the HTTPS service with a created SSL server policy.
Follow these steps to associate the HTTPS service with an SSL server policy:
To do… Use the command… Remarks
Enter system view system-view —
Associate the HTTPS service with
an SSL server policy ip https ssl-server-policy
policy-name
Required
Not associated by default
NOTE:
•
If the ip https ssl-server-policy command is executed repeatedly, the HTTPS service is only associated
with the last specified SSL server policy.
• When the HTTPS service is disabled, the association between the HTTPS service and the SSL server is
automatically removed. To enable it again, you need to re-associate the HTTPS service with an SSL
server policy.
• When the HTTPS service is enabled, no modification of its associated SSL server policy takes effect.
Enabling the HTTPS Service
The device can act as the HTTPS server and users can access and control the device through the Web
function only when the HTTPS service is enabled.
Follow these steps to enable the HTTPS service:
To do… Use the command… Remarks
Enter system view system-view —
Enable the HTTPS service ip https enable
Required
Disabled by default.