H3C Technologies H3C SecPath F1000-E - Manual (Page 216)

2
boot-loader Set boot loader
bootrom Update/read/backup/restore bootrom
cd Change current directory
clock Specify the system clock
cluster Run cluster command
copy Copy from one file to another
debugging Enable system debugging functions
delete Delete a file
dir List files on a file system
display Show running system information
......omitted......
Step2 Enter a command and a ? separated by a space. If ? is at the position of a keyword, all the keywords
are given with a brief description.
terminal ?
debugging Send debug information to terminal
logging Send log information to terminal
monitor Send information output to current terminal
trapping Send trap information to terminal
Step3 Enter a command and a ? separated by a space. If ? is at the position of a parameter, the description
about this parameter is given.
system-view
[Sysname] interface vlan-interface ?
<1-4094> VLAN interface number
[Sysname] interface vlan-interface 1 ?
[Sysname] interface vlan-interface 1
Where, indicates that there is no parameter at this position. The command is then repeated in the
next command line and executed if you press Enter.
Step4 Enter a character string followed by a ?. All the commands that start with this string are displayed.
c?
cd
clock
copy
Step5 Enter a command followed by a character string and a ?. All the keywords starting with this string are
listed.
display cl?
clipboard
clock
Step6 Press Tab after entering the first several letters of a keyword to display the complete keyword, provided
these letters can uniquely identify the keyword in this command. If several matches are found, the
complete keyword which is matched first is displayed (the matching rule is: the letters next to the input
letters are arranged in alphabetic order, and the letter in the first place is matched first.). If you
repeatedly press Tab, all the keywords that start with the letter that you enter are displayed in cycles,
and you can select the keywords needed.