H3C Technologies H3C SecPath F1000-E - Manual (Page 154)

4
To do… Use the command… Remarks
Convert the user-defined plain text
password to a cipher text
password
snmp-agent
calculate-password
plain-password mode
{ 3desmd5 | 3dessha | md5 |
sha } { local-engineid |
specified-engineid engineid }
Optional
Add a new user to an SNMP agent
group
snmp-agent usm-user v3
user-name group-name [ [ cipher ]
authentication-mode { md5 |
sha } auth-password
[ privacy-mode { 3des |
aes128 | des56 }
priv-password ] ] [ acl acl-number ]
Required
If the cipher keyword is specified,
the arguments auth-password and
priv-password are considered as
cipher text passwords.
Configure the maximum size of an
SNMP packet that can be received
or sent by an SNMP agent
snmp-agent packet
max-size byte-count Optional
1,500 bytes by default.
Follow these steps to configure SNMPv1 and SNMPv2c:
To do… Use the command… Remarks
Enter system view system-view —
Enable the SNMP agent snmp-agent
Optional
Disabled by default
You can enable the SNMP
agent with this command or any
command that begins with
snmp-agent.
Configure SNMP agent system
information
snmp-agent sys-info
{ contact sys-contact |
location sys-location |
version { { v1 | v2c | v3 }*
| all } }
Required
The defaults are as follows:
Hangzhou H3C Technologies
Co., Ltd. for contact; Hangzhou
China for location and SNMP
v3 for the version.
Configure a local engine ID for an
SNMP entity snmp-agent
local-engineid engineid
Optional
Company ID and device ID by
default.
Create or update MIB view content for
an SNMP agent
snmp-agent mib-view
{ excluded | included }
view-name oid-tree [ mask
mask-value ]
Optional
The MIB view name is
ViewDefault and OID is 1 by
default.
Configur
e SNMP
NMS
access
right
Configure
directly
Create an
SNMP
community
snmp-agent community
{ read | write }
community-name [ acl
acl-number | mib-view
view-name ]*
Use either approach.
Both commands can be used to
configure SNMP NMS access
rights. The second command