H3C Technologies H3C SecPath F1000-E - Manual (Page 51)

50
# If Device A fails, use the display vrrp ipv6 verbose command to display the detailed information
of VRRP group 1 on Device C.
[DeviceC-GigabitEthernet0/1] display vrrp ipv6 verbose
IPv6 Standby Information:
Run Mode : Load Balance
Run Method : Virtual MAC
Total number of virtual routers : 1
Interface GigabitEthernet0/1
VRID : 1 Adver Timer : 100
Admin Status : Up State : Backup
Config Pri : 100 Running Pri : 100
Preempt Mode : Yes Delay Time : 5
Auth Type : None
Virtual IP : FE80::10
Member IP List : FE80::3 (Local, Backup)
FE80::1 (Backup)
FE80::2 (Master)
Forwarder Information: 3 Forwarders 2 Active
Config Weight : 255
Running Weight : 255
Forwarder 01
State : Active
Virtual MAC : 000f-e2ff-4011 (Take Over)
Owner ID : 0000-5e01-1101
Priority : 85
Active : local
Redirect Time : 591 secs
Time-out Time : 1791 secs
Forwarder 02
State : Listening
Virtual MAC : 000f-e2ff-4012 (Learnt)
Owner ID : 0000-5e01-1103
Priority : 85
Active : FE80::2
Forwarder 03
State : Active
Virtual MAC : 000f-e2ff-4013 (Owner)
Owner ID : 0000-5e01-1105
Priority : 255
Active : local
The above information indicates that if Device A fails, Device B becomes the master, Device C becomes
the AVF among the VFs that correspond to virtual MAC address 000f-e2ff-4011, and packets sent from
Host A to external networks are forwarded by Device C.