H3C Technologies H3C SecPath F1000-E - Manual (Page 145)

6
Displaying and Maintaining RMON
To do… Use the command… Remarks
Display RMON statistics
display rmon statistics
[ interface-type interface-number ]
Available in any view
Display the RMON history control
entry and history sampling
information
display rmon history
[ interface-type interface-number ]
Available in any view
Display RMON alarm
configuration information display rmon alarm
[ entry-number ]
Available in any view
Display RMON prialarm
configuration information display rmon prialarm
[ entry-number ]
Available in any view
Display RMON events
configuration information
display rmon event
[ entry-number ]
Available in any view
Display log information for the
specified or all event entries. display rmon eventlog
[ entry-number ]
Available in any view
Ethernet Statistics Group Configuration Example
Network requirements
As shown in Figure 1 , Agent is connected to a configuration terminal through its console port and to
Server through Ethernet cables.
Gather performance statistics on received packets on GigabitEthernet 0/1 through RMON Ethernet
statistics table, and thus the administrator can view the statistics on packets received on the interface at
any time.
Figure 1 Network diagram for RMON
Configuration procedure
# Configure RMON to gather statistics for interface GigabitEthernet 0/1.
system-view
[Sysname] interface gigabitEthernet0/1
[Sysname-GigabitEthernet0/1] rmon statistics 1 owner user1
After the above configuration, the system gathers statistics on packets received on GigabitEthernet 0/1.
To view the statistics of the interface: