H3C Technologies H3C SecPath F1000-E - Manual (Page 226)

3
Table 1 Severity description
Severity Severity value Description
Corresponding keyword
in commands
Emergency 0 The system is unusable. emergencies
Alert 1 Action must be taken immediately alerts
Critical 2 Critical conditions critical
Error 3 Error conditions errors
Warning 4 Warning conditions warnings
Notice 5 Normal but significant condition notifications
Informational 6 Informational messages informational
Debug 7 Debug-level messages debugging
Eight Output Destinations and Ten Channels of System
Information
The system supports eight information output destinations, including the console, monitor terminal
(monitor), log buffer, log host, trap buffer, SNMP module, Web interface (syslog) and log file.
The system supports ten channels. The eight channels 0 through 6, and channel 9 are configured with
channel names, output rules, and are associated with output destinations by default. The channel names,
output rules and the associations between the channels and output destinations can be changed through
commands. Besides, you can configure channels 7, and 8 without changing the default configuration of
the eight channels.
Table 2 Information channels and output destinations
Information
channel
number
Default
channel name
Default output destination Description
0 console Console
Receives log, trap and debugging
information.
1 monitor Monitor terminal
Receives log, trap and debugging
information, facilitating remote
maintenance.
2 loghost Log host
Receives log, trap and debugging
information and information will be
stored in files for future retrieval.
3 trapbuffer Trap buffer
Receives trap information, a buffer
inside the device for recording
information.
4 logbuffer Log buffer
Receives log and debugging
information, a buffer inside the device
for recording information.
5 snmpagent SNMP module Receives trap information.