H3C Technologies H3C SecPath F1000-E - Manual (Page 212)

18
To do… Use the command… Remarks
Switch the user privilege level super [ level ]
Required
When logging in to the device, a
user has a user privilege level,
which depends on user interface or
authentication user level.
Available in user view.
When you switch the user privilege level, the information you need to input varies with combinations of
user interface authentication mode and super authentication mode.
Table 4 Information input for user privilege level switch
User interface
authentication
mode
User privilege level
switch
authentication
mode
Information input for the
first authentication mode
Information input after the
authentication mode changes
local
Local user privilege level
switch password (configured
on the device) —
local scheme
Local user privilege level
switch password
Username and password for
privilege level switch (configured
on the AAA server)
scheme
Username and password for
privilege level switch
—
none/passwor
d
scheme local
Username and password for
privilege level switch Local user privilege level switch
password
local
Local user privilege level
switch password
—
local scheme
Local user privilege level
switch password
Password for privilege level
switch (configured on the AAA
server). The system uses the
username used for logging in as
the privilege level switch
username.
scheme
Password for privilege level
switch (configured on the
AAA server). The system uses
the username used for
logging in as the privilege
level switch username.
—
scheme
scheme local
Password for privilege level
switch (configured on the
AAA server). The system uses
the username used for
logging in as the privilege
level switch username.
Local user privilege level switch
password