H3C Technologies H3C SecPath F1000-E - Manual (Page 321)

4
Figure 4 Patches are activated
RUNNING state
After you confirm the running of the ACTIVE patches, the state of the patches will become RUNNING
and will be in the RUNNING state after system reboot. For the five patches in
Figure 4 , if you confirm
running the first three patches, their states will change from ACTIVE to RUNNING. At this time, the patch
states of the system are as shown in
Figure 5 .
Figure 5 Patches are running
The patches that are in the RUNNING state will be still in the RUNNING state after system reboot.
Hotfix Configuration Task List
Task Remarks
One-Step Patch Installation
Install patches
Step-by-Step Patch Installation
Use either approach.
The step-by-step patch installation allows you to
control the patch status.
One-Step Patch Uninstallation
Uninstall
patches
Step-by-Step Patch Uninstallation
Use either approach.
The step-by-step patch uninstallation allows you to
control the patch status.