H3C Technologies H3C SecPath F1000-E - Manual (Page 76)

10
To do… Use the command… Remarks
Enter system view system-view —
Enter NQA test group view
nqa entry admin-name
operation-tag
—
Configure the test type as DNS
and enter test type view
type dns Required
Specify a destination address for
a DNS test
destination ip ip-address
Required
By default, no destination IP
address is configured for a test
operation.
The destination IP address must
be the IP address of the DNS
server.
Configure the domain name resolve-target domain-name
Required
By default, no domain name is
configured for a DNS test.
Configure optional parameters
common to an NQA test group See Configuring Optional Parameters
Common to an NQA Test Group
Optional
NOTE:
Because a DNS test is a process to simulate the domain name resolution, the mapping between the
domain name and the IP address is not saved.
Configuring an FTP Test
An FTP test is mainly used to test the connection between the NQA client and a specified FTP server and
the time necessary for the FTP client to transfer a file to or download a file from the FTP server.
Configuration prerequisites
Before an FTP test, perform some configurations on the FTP server. For example, configure the username
and password that are used to log in to the FTP server. For more information about FTP server
configuration, see FTP and TFTP Configuration in the IP Services Volume.
Configuring an FTP test
Follow these steps to configure an FTP test:
To do… Use the command… Remarks
Enter system view system-view —
Enter NQA test group view
nqa entry admin-name
operation-tag
—
Configure the test type as FTP and
enter test type view
type ftp Required