H3C Technologies H3C SecPath F1000-E - Manual (Page 146)

7
• Execute the display command.
display rmon statistics gigabitEthernet0/1
EtherStatsEntry 1 owned by user1-rmon is VALID.
Interface : GigabitEthernet0/1
etherStatsOctets : 21657 , etherStatsPkts : 307
etherStatsBroadcastPkts : 56 , etherStatsMulticastPkts : 34
etherStatsUndersizePkts : 0 , etherStatsOversizePkts : 0
etherStatsFragments : 0 , etherStatsJabbers : 0
etherStatsCRCAlignErrors : 0 , etherStatsCollisions : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length:
64 : 235 , 65-127 : 67 , 128-255 : 4
256-511: 1 , 512-1023: 0 , 1024-1518: 0
• Obtain the value of the MIB node directly by executing the SNMP Get operation on the NMS
through software.
History Group Configuration Example
Network requirements
As shown in Figure 2 , Agent is connected to a configuration terminal through its console port and to
Server through Ethernet cables.
Gather statistics on received packets on GigabitEthernet 0/1 every one minute through RMON history
statistics table, and thus the administrator can view whether data burst happens on the interface in a
short time.
Figure 2 Network diagram for RMON
Configuration procedure
# Configure RMON to periodically gather statistics for interface GigabitEthernet 0/1.
system-view
[Sysname] interface gigabitEthernet0/1
[Sysname-GigabitEthernet0/1] rmon history 1 buckets 8 interval 60 owner user1
After the above configuration, the system periodically gathers statistics on packets received on
GigabitEthernet 0/1: the statistical interval is 1 minute, and statistics of the last 8 times are saved in the
history statistics table. To view the statistics of the interface:
• Execute the display command.
[Sysname-GigabitEthernet0/1] display rmon history
HistoryControlEntry 2 owned by null is VALID