H3C Technologies H3C SecPath F1000-E - Manual (Page 64)

11
• User can log in to Device via Telnet, and User and Device can reach each other.
Figure 2 Network diagram for remote scheduled automatic upgrade
Configuration procedure
Step1 Configuration on the FTP server (Note that configurations may vary with different types of servers)
• Set the access parameters for the FTP client (including enabling the FTP server function, setting the
FTP username to aaa and password to hello, and setting the user to have access to the
flash:/aaa directory).
system-view
[FTP-Server] ftp server enable
[FTP-Server] local-user aaa
[FTP-Server-luser-aaa] password cipher hello
[FTP-Server-luser-aaa] service-type ftp
[FTP-Server-luser-aaa] authorization-attribute work-directory flash:/aaa
• Use text editor on the FTP server to edit batch file auto-update.txt. The following is the content
of the batch file:
return
startup saved-configuration new-config.cfg
boot-loader file soft-version2.bin main
reboot
Step2 Configuration on Device
# Log in to the FTP server (note that the prompt may vary with servers.)
ftp 2.2.2.2
Trying 2.2.2.2 ...
Press CTRL+K to abort
Connected to 2.2.2.2.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(2.2.2.2:(none)):aaa
331 Give me your password, please
Password:
230 Logged in successfully
[ftp]
# Download file auto-update.txt on the FTP server.